胡國清檢視原始碼討論檢視歷史
胡國清,男,廈門大學嘉庚學院教授。
人物履歷
- 1964年2月出生於四川
- 1983~1987年 西北工業大學 自動控制系(學士)
- 1987~1990年 西北工業大學 自動控制系(碩士)
- 1990~1993年 成都科技大學 機械工程系(博士)
- 1993~1995年 上海交通大學 機械工程系(博士後,副教授)
- 1995~1999年 廈門大學 機電工程系(副教授,副系主任)
- 2000~2001年 Case Western Reserve University (Visiting Professor)
- 1999~ 2004 廈門大學物理與機電工程學院(教授,副院長)
- 2004~ 今 廈門大學物理與機電工程學院教授、博導
研究方向
機電控制、微機電系統(MEMS)、工業自動化與工業機器人、流體傳動與控制、金屬無模具快速成型
科研項目
•金屬無模具快速成型加工
•自適應磁流變加速度微傳感器
• High Sensitive Micro-Pressure Sensor
•High Temperature and High pressure Sensor
•Design a new bonding machine for bonding Silicon and Glass.
•Low Micro-Pressure Sensor Testing system
•Full Automation Cutting Machine.
• 全自動打孔機,目前已通過廠家驗收,每年可以為公司創利潤60多萬元
•全自動動靜簧插入機
•液壓閥閥腔內空蝕空化研究
•陶瓷液壓元件的研究
•氣流-振動破拱助流技術的研究與工業應用 (1998年通過國家鑑定,達到國內領先水平,年創利潤202.136萬元)。
•防涌振動快速給礦機 (1998年通過國家鑑定,達到國內領先水平,年創利潤316.988萬元)。
• "行走式礦車清底機械手" (1998年通過國家鑑定,達到國內領先水平,年創利潤95.8萬元)
• 新產品-防爆截止閥,中華人民共和國專利號:ZL94239863 .X
• 電磁防爆閥, 中華人民共和國發明專利號:99104634.X
• 全自動打孔機,中華人民共和國發明專利號:00130749.5
• 正反饋式液壓防爆截止閥的理論與應用研究
• "設備的振動控制,故障診斷和預測/預知性維修的研究與開發"
• 液壓設備的狀態監測、故障診斷與預測/維修的研究
•液壓設備多參數故障診斷與預測/維修研究
•液壓閥流道能耗研究
社會兼職
• 2000年起擔任美國機械工程學會會員。
• 1999年起擔任福建省工程圖學學會常務理事;
• 1999年起擔任福建省力學學會理事。
• 1998年起擔任中國機械工程學會高級會員;
• 1998年起擔任中國力學學會液壓與氣動專業委員會特約理事;
• 1997年起擔任廈門市機械工程學會理事;
• 1996年起擔任福建省力學學會理事;
• 1995年擔任Second International Symposium On Fluid Power Transmission and Control國際會議秘書長,組織委員。
學術成果
論文
1.硅微加工光波導壓力傳感器的設計,傳感技術,2002年21卷第1期,pp60~62
2. 靜電式微開關硅懸臂樑的變形分析,傳感技術,2001年20卷第12期,pp29~31
3.A Surface Micro machined Double Sided Touch Mode Capacitive Pressure Sensor,2001,SPIE International Conference, 2001,Nanjing, China
4. 雙面接觸電容壓力傳感器的設計及製造工藝流程,儀表技術與傳感器,2001年, No.9, PP33~35
5. 不完全齒輪的高速運用, 機械, 2001, Vol.28, No. 2, pp59~60;
6. A Study on the Reliability Control Method for Preventing Surge of High Pressure Centrifugal Air-blower, Journals Issues on Composite Mechanics and Design Vol.6, N2, 2000.
7.New Theory and Technics in Boring, Journals Issues on Composite Mechanics and Design,Vol.6, N1 2000,
8. 陶瓷液壓閥的應力計算及分析,機械工程學報 2000, Vol.9 PP:44~47
9. 空蝕空化現象與液壓系統新進展, 機床與液壓, 2000年No.6, pp6~9
10. 機電一體化與先進制造技術發展動態,福建省工程圖學學會'99綜合學術年會論文集,1999.5, pp:1~12
11. 全自動插動靜簧機的氣動和PLC控制系統設計, 機床與液壓, 1999, Vol.6
12.Recursion Least Square Method to Study the Fault Diagnosis and its Model of Hydraulic Equipment, Journal of International Equipment management and Maintenance, International Journal of Plant Engineering and Management, Vol. 1, 1999.
13.The designs on the control system of the full automation inserting dynamic and static spring leaf Machine, Proceedings of the Third Int. Symposium on Fluid Power. Harbin China, 1999
14.A New Type of FB2 Electromagnetic Anti-exploding Valve, Proceedings of the Third Int. Symposium on Fluid Power. Harbin China, 1999
15. 液壓設備在線故障診斷通用模型及程序,機床與液壓,Vol.2, 1998, pp:50-60
16. 《機電控制工程基礎與應用》,機械工業出版社,1997年8月.
17. ASM和k?e模型對比研究液壓集成塊流道, 水動力學研究與進展, Ser.A, Vol, 12, No.2, 1997,6, pp226-230
18. 能量損失與渦量相關矩關係的理論研究,水動力學研究與進展,Vol.11, No.6, 1996, pp678-680
19. 多路換向閥流道數值模擬的一種新方法-代數應力模型, 水動力學研究與進展,1996,6,Ser.A,Vol.11,No.3pp:272-275[1]