韩啸查看源代码讨论查看历史
韩啸，博士，副教授，大连理工大学，工程力学系，硕士生导师。 [1]
工作经历
2019.12 - 至今大连理工大学工程力学系副教授
2016.12 - 2017.12昆士兰科技大学, 澳大利亚机械工程系访问学者
2015.01 - 2019.12大连理工大学工程力学系讲师
教育经历
2011.09 - 2014.10 大连理工大学车辆工程博士
2012.09 - 2013.09萨里大学, 英国机械工程联合培养博士
2005.09 - 2009.07大连理工大学工程力学学士
研究方向
胶接界面多场耦合老化表征新方法和力学建模.
轻质连接结构极端环境耐久性试验和性能分析.
复合材料轻量化连接工艺和力学性能评价.
长期致力于轻质金属和纤维增强复合材料的新型连接技术及性能评价研究，围绕轻质材料的胶接、胶-铆、栓-胶等复合连接结构设计、 制备工艺、试验表征、力学建模和湿热环境服役耐久性评价等方面开展了研究工作，特别是在极端工况环境老化试验、复合材料损伤和 裂纹扩展、基于有限元二次开发的多场耦合老化行为建模预测等领域取得了丰富成果。在国内外该研究领域首次提出胶层在湿-热-力场 联合工况下老化行为的完全耦合分析方法，从而为胶接结构实际服役过程中残余强度评价和服役寿命预测提供了有效方法。研究成果得 到了中国工程物理研究院、中国商飞、奥新新能源汽车、日本神户制钢所等科研院所和企业的关注，其中关键部件的制备、连接和建模 预测技术则直接应用到了航空航天、汽车、微电子等领域实际部件生产和服役寿命预测中。
自2011年以来共发表相关领域学术论文50余篇，其中SCI收录33篇，EI收录中文期刊（机械工程学报）4篇，包括国内外复合材料和结构 胶接领域权威期刊Journal of Power Sources (IF: 8.247)、Composites Part B: Engineering (IF:7.635)、Composite Structures (IF: 5.138)、Journal of Sandwich Structures and Materials (IF:5.616)、Thin-walled Structures (IF: 4.033)、International Journal of Adhesion and Adhesives (IF: 2.671)、机械工程学报等。所发表论文Google Scholar总引用393次，Web of Science单篇 最高他引44次。主持和参加国家自然科学基金、国家重点研发计划、中国博士后科学基金、辽宁省教育厅科学研究项目等基金项目9项， 校企合作横向课题9项。
先后在英国萨里大学Andrew Crocombe教授胶接环境耐久性研究团队和澳大利亚昆士兰科技大学Yuantong Gu教授工程科学先进建模仿真 实验室进行联合培养和访学交流。获邀担任国家自然科学基金通讯评审专家、SCI期刊Journal of Adhesion Science & Technology编 委、英国Society for Adhesion & Adhesives会员、5th ICSAB分会场主席、第27届北京粘接学会学术年会大会邀请报告。担任 Composites Part B、Composite Structures、Mechanical Systems and Signal Processing、Polymer Testing、Thin-Walled Structures、机械工程学报等十余个学术期刊审稿人。获钱令希力学奖、《机械工程学报》优秀审稿专家。
学术成果
科研项目
国家自然科学基金项目, 湿-热-交变载荷耦合作用下胶接结构强度退化预测模型研究.
中国博士后科学基金面上项目, 异种材料胶铆接头多场耦合环境耐久性试验和建模研究.
辽宁省教育厅科学研究一般项目, 异质材料结构胶接接头基本力学性能及其环境耐久性研究.
大连理工大学基本科研业务费交叉探索科研专题, 栓-胶复合连接力学性能创成与退化机理.
水电机械设备设计与维护湖北省重点实验室开放基金, 水电装备胶接部件湿热环境服役性能建模评价.
中国工程物理研究院, 典型结构工艺及湿环境数值建模评价研究.
山东工业陶瓷研究院, 胶黏剂对接接头拉离强度和I型断裂韧性测定.
中国工程物理研究院, 环氧树脂粘接剂力学性能试验和建模评价.
江苏奥新新能源汽车, 奥新2+2车型材料力学性能的试验测定.
国家重点研发计划, 自控温高产热纳米材料与肿瘤磁热疗技术.
国家自然科学基金项目, 纤维增强复合材料板壳结构的准周期分析模型与优化设计方法.
国家自然科学基金项目, 基于概念设计的车身装配结构拓扑优化理论和方法的研究.
大连理工大学基本科研业务费重大项目科研专题, 碳纤维复合材料车身关键连接结构服役性能研究.
中国商用飞机有限责任公司, 典型帽形加筋平板轴压试验.
日本神户制钢所, DUT KOBELCO Research and Development Agreement.
江苏奥新新能源汽车, 基于碳纤维复合材料整车轻量化技术研究.
江苏奥新新能源汽车, 奥新2+2车型碰撞安全性能分析与优化技术.
论文成果
Ying L, Gao T, Hou W, Dai M, Han X,Jiang D. On crashing behaviors of bio-inspired hybrid multi-cell Al/CFRPhierarchical tube under quasi-static loading: An experimental study. CompositeStructures. 2021, 257:113103.
Chao Y, Ma J, Chen Z, Zhang Y, Yang P, Wang S, Wang L, Han X, Liu Y, Wu C. Modellingprediction on the degradation in mode II fracture energy of structural adhesivesubjected to hygrothermal ageing. The Journal of Adhesion. 2020.
Wu CW, Zhang W, Han X, ZhangYX, Ma GJ. A systematic review for structure optimization and clamping loaddesign of large proton exchange membrane fuel cell stack. Journal of PowerSources, 2020, 476:228724.
Yan CC, Ma JL, Zhang YX, Wu CW, Yang P, Wang P, Zhang W, Han X. The fracture performance ofadhesively bonded orthodontic brackets: an experimental-FE modelling study. TheJournal of Adhesion. 2020.
Akhmet G, Yu Y, Hu P, Hou W, Han X.Analysis of the performance of adhesively bonded corrugated core sandwichstructures using cohesive zone method. Journal of Sandwich Structures andMaterials, 2020, 22(1):104-124.
Han X, Akhmet G, Hu P, Hou W,Baubekov Y, Akhmetov M. Numerical prediction on the mechanical degradation ofadhesively bonded corrugated sandwich beam after hygrothermal ageing. CompositeStructures, 2020, 241:112131.
Han X, Akhmet G, Zhang W, Chao YX,Jin Y, Yu Y, Hu P, Ibraimov A. The effect of adhesive fillet on mechanicalperformance of adhesively bonded corrugated sandwich structures: anexperimental–numerical study. Journal of Adhesion, 2020, 96(5):515-537.
Han X, Chao Y, Yang P, Li X, ZhangW, Jin Y, Wu C. Strength prediction of adhesively bonded ferrite pillar–tinbronze plate under axial shear loading. Journal of Adhesion Science andTechnology, 2020, 34(6):616-634.
Han X, Jin Y, Silva LFMD, Costa M, WuC. On the effect of adhesive thickness on mode I fracture energy - anexperimental and modelling study using a trapezoidal cohesive zone model.Journal of Adhesion, 2020, 96(5):490-514.
Han X, Pickering E, Bo A, Gu Y.Characterisation on the hygrothermal degradation in the mechanical property ofstructural adhesive: A novel meso-scale approach. Composites PartB-engineering, 2020, 182:107609.
Wang C, Han X, Yang C, ZhangX, Hou W. Assumed stress quasi-conforming formulation for static and freevibration analysis of symmetric laminated plates. Engineering Computations,2020.
Zhang W, Bai X, Hou B, Sun Y, HanX. Mechanical properties of the three-dimensional compression-twistcellular structure. Journal of Reinforced Plastics and Composites, 2020,39:260-277.
Zheng G, Liu C, Han X, Li W.Effect of spew fillet on adhesively bonded single lap joints with CFRP andaluminum-alloy immersed in distilled water. International Journal of Adhesionand Adhesives, 2020, 99:102590.
Liu Y, Zhou S, Han X, Yan C,Lei Z, Wang X. Analysis of the influence of a new type of buccal tube base meshdesign on the adhesive layer stress distribution and bond strength. Journal ofAdhesion Science and Technology, 2020, 34(18):2011- 2030.
Zheng G, Wang H, Han X, Li W.Mechanical behavior of AL/CFRP single-lap joint subjected to combined thermaland constant loading. The Journal of Adhesion, 2019:1-19.
侯文彬, 刘璟琳, 陈广义, 韩啸, 徐翔, 郑文献. 胶层缺陷对胶接-拉铆搭接剪切接头力学性能影响研究. 机械工程学报, 2019, 55(24):37-44.
Gao T, Ying L, Hu P, Han X,Rong H, Wu Y, Sun J. Investigation on mechanical behavior and plastic damage ofAA7075 aluminum alloy by thermal small punch test: Experimental trials,numerical analysis. Journal of Manufacturing Processes, 2020, 50:1-16.
Ying L, Gao T, Rong H, Han X,Hu P, Hou W. On the thermal forming limit diagram (TFLD) with GTN mesoscopicdamage model for AA7075 aluminum alloy: Numerical and experimentalinvestigation. Journal of Alloys and Compounds, 2019, 802:675-693.
Wang L, Xu L, Xie Y, Du Y, Han X.A new hybrid conjugate gradient method for dynamic force reconstruction.Advances in Mechanical Engineering, 2019, 11(1):168781401882236.
Han X, Hou S, Ying L, Hou W, AliyevH. On the fracture behaviour of adhesively bonded CFRP hat-shaped thin-walledbeam under axial crushing load: An experimental and modelling study. CompositeStructures, 2019, 215:258-265.
Han X, Chao Y, Zhang W, Chao Y, WuC. Study on the effect of post curing on the mode II fracture energy ofstructural adhesive using a parameter identification approach. InternationalJournal of Adhesion and Adhesives, 2019, 95:102398.
Hu P, Akhmet G, Wu C, Han X,Chao YX, Yu Y, Orazbayeva A. Characterisation on the influence of curinghistory on the mechanical performance of adhesively bonded corrugated sandwichstructures. Thin-walled Structures, 2019, 142:37-51.
Hou W, Xu X, Han X, Wang H,Tong L. Multi-objective and multi-constraint design optimization for hat-shapedcomposite T- joints in automobiles. Thin-walled Structures, 2019, 143:106232.
韩啸, 金勇, 杨鹏, 李小阳, 侯文彬. 胶层厚度对胶粘剂Ⅰ型断裂韧性影响试验和仿真研究. 机械工程学报, 2018, 54(10):43-52.
Han X, Jin Y, Zhang W, Hou W, Yu Y.Characterisation of moisture diffusion and strength degradation in anepoxy-based structural adhesive considering a post-curing process. Journal ofAdhesion Science and Technology, 2018, 32(15):1643- 1657.
韩啸, 晁岳星, 金勇. 后固化工艺对结构胶粘剂吸水特性和力学性能退化行为影响研究. 京津冀粘接技术研讨会暨北京粘接学会学术年 会; 2018.
Bai R, Bao S, Lei Z, Yan C, Han X.Finite element inversion method for interfacial stress analysis of compositesingle- lap adhesively bonded joint based on full-field deformation.International Journal of Adhesion and Adhesives, 2018, 81:48-55.
Li W, Tang LP, Han X, Gao EP.The effect of constant loading on the mechanical behavior of bulk adhesive.Journal of Adhesion, 2017, 93(12):1-15.
韩啸, 金勇, 杨鹏. 结构胶接接头湿热环境耐久性研究概述. 河北科技大学学报, 2017, 38(3):209-217.
史昱, 韩啸. 汽车复合材料层合板准静态力学性能的试验测定. 工程塑料应用, 2016, (9):92-95.
Li W, Pang B, Han X, Tang L,Zhao K, Hu P. Predicting the Strength of Adhesively Bonded T-joints UnderCyclic Temperature using a Cohesive Zone Model. Journal of Adhesion, 2016,92(11):892-907.
Li W, Ma M, Han X, Tang LP,Zhao JN, Gao EP. Strength Prediction of Adhesively Bonded Single Lap JointsUnder Salt Spray Environment Using a Cohesive Zone Model. Journal of Adhesion,2016, 92(11):916-937.
Hu P, Shi ZW, Wang XX, Li W, Zhou SG, Han X. Strength Degradation of Adhesively Bonded Single-Lap Jointsin a Cyclic- Temperature Environment Using a Cohesive Zone Model. Journal ofAdhesion, 2015, 91(8):587-603.
Han X, Crocombe AD, Anwar SNR, Hu P,Li W. The Effect of a Hot–Wet Environment on Adhesively Bonded Joints Under aSustained Load. Journal of Adhesion, 2014, 90:420-436.
Han X, Crocombe AD, Anwar SNR, Hu P.The strength prediction of adhesive single lap joints exposed to long termloading in a hostile environment. International Journal of Adhesion andAdhesives, 2014, 55:1-11.
Hu P, Han X, Li W, Li L, ShaoQ. Research on the static strength performance of adhesive single lap jointssubjected to extreme temperature environment for automotive industry.International Journal of Adhesion and Adhesives, 2013, 41:119- 126.
Hu P, Han X, Silva LFMD, Li W.Strength prediction of adhesively bonded joints under cyclic thermal loadingusing a cohesive zone model. International Journal of Adhesion and Adhesives,2013, 41:6-15.
韩啸, 李伟东, 胡平. 非平衡胶接接头循环温度场强度退化研究. 机械工程学报, 2012, 48(18):97-103.
胡平, 韩啸, 李伟东, 施志伟, 周申光. 考虑汽车车身涂装工艺影响的非平衡胶接接头强度. 机械工程学报, 2012, 48(20):93-102.
Hu P, Shao Q, Li W, Han X.Experimental and numerical analysis on load capacity and failure process ofT-joint: Effect produced by the bond-line length. International Journal ofAdhesion and Adhesives, 2012, 38:17-24.