求真百科欢迎当事人提供第一手真实资料,洗刷冤屈,终结网路霸凌。

倪军查看源代码讨论查看历史

事实揭露 揭密真相
跳转至: 导航搜索
倪军 (知名教授)
出生 1961年
国籍 美国
职业 教授

倪军,1961年出生,上海交大密西根学院院长,入选教育部首批"长江学者"特聘教授,以及上海交大第一批"长江学者奖励计划"特聘教授、上海杉达学院首席教授、大连交通大学客座教授 。

人物履历

倪军教授,美国籍,男,1961年11月生。制造工程专家、密西根大学机械机械工程系教授、美国国家科学基金会智能维护系统中心(IMS Center)主任 、密西根大学吴贤铭制造科学冠名教授、吴贤铭制造研究中心主任,上海交通大学校长特聘顾问、密西根学院院长、美国机械工程师学会会士 。

经历

教育经历

1987Univ. of Wisconsin-Madison Mechanical Eng博士

1984Univ. of Wisconsin-Madison Mechanical Eng硕士

1982Shanghai Jiao Tong University Mechanical Eng学士

工作经历

1997.09 - 至今,美国密西根大学机械工程系教授

1993.01-1997.08,美国密西根大学机械工程系副教授

1989.09-1992.12,美国密西根大学机械工程系助理研究员

1987.09-1989.08,美国密西根大学机械工程系博士后

学术兼职

2003-2004, 美国机械工程学会,制造工程分会,主席

2000.9 – 2005.8 美国机械工程学会,制造工程分会执行委员会委员

1997.7 – 2000.6,美国机械工程学会制造技术组技术规划委员会委员

1994 – 2003,《制造系统》杂志副主编

1995 – 1999,2003 – 至今,机械工业部中国机械科学研究院客座研究员

1994 – 1997,华中科技大学客座教授

1995 -1998,2004 –至今,台湾工业技术研究院机械工业研究实验室顾问委员会委员

1998 – 2001,2003 – 2006 ,清华大学客座教授

1999 – 2002,大连理工大学客座教授

2000 – 2003,西安交通大学客座教授

2001 – 2002,香港理工大学特聘讲座教授

2002 – 2005,中国科学院海外评审委员会委员

2003-2006,中国科技部海外专家组委员

2004-至今,韩国机械与材料研究院,微细工厂计划,科学顾问

2007-至今,南非科技与技术部,先进生产技术计划,科学顾问

2008-至今,日本东京农工大学客座教授

成就荣誉

1991,制造工程师学会杰出青年制造工程师奖

1994,被克林顿总统授予美国国家科学基金总统教授奖

1999,中国国家自然科学基金会海外杰出青年基金获得者

1999 – 2004, 中国教育部长江学者特聘、讲座教授

2000-2001,美国密西根大学杰出教职成就Robert M. Caddell奖

2001, 北美制造研究年会最佳论文奖

2002 美国密西根大学工学院杰出研究奖

2002,制造工程师学会Fellow

2002,国际设计与制造前沿会议最佳论文奖

2003,上海市政府海外科学家杰出贡献银质奖章

2004,美国机械工程学会Fellow

2004,国际设计与制造前沿会议最佳论文奖

2005,半导体研究协会最佳论文奖

2006 - 2011,美国密西根大学工程学院吴贤铭冠名教授

2006-2007, 美国密西根大学工学院杰出教育成就奖

2007,半导体研究协会最佳论文奖

2013年度中华人民共和国国际科学技术合作奖获得者。

代表性论著

倪军院长致辞 原图链接 [2]

1.J. Tao, A. J. Shih, J. Ni, 2008, "Experimental Study of the Dry and Near-Dry Electrical Discharge Milling Processes," ASME Journal of Manufacturing Science and Engineering, Vol. 130(1), pp. 1-9

2.Z. Huang, A.J. Shih, and J. Ni, 2007, "Laser Interferometry Hologram Registration for Three-Dimensional Precision Measurements," ASME Journal of Manufacturing Science and Engineering, Vol. 128, pp. 1006-1013.

3.H. S. Kim, M. Koc, and J. Ni, 2007, "A hybrid multi-fidelity approach to the optimal design of warm forming process using a knowledge-based artificial neural network", International Journal of Machine Tools and Manufacture, Vol. 47, No. 2, pp. 211-222

4.Kim, G.Y. Koc, M., Mayor, R., and Ni, J., 2007,"Modeling of the Semi-solid Material Behavior and Analysis of Micro/meso-scale Feature Forming", ASME Journal of Manufacturing Science and Engineering, Vol. 129, No. 2, pp.237-245

5.Z. Yang, Q. Chang, D. Djurdjanovic, J. Ni, and J. Lee, 2007, "Maintenance Priority Assignment using On-line Production Information," ASME Transaction, Journal of Manufacturing Science and Engineering, Vol. 129, No. 2, pp.435-446

6.H. Choi, M. Koc, and J. Ni, 2007, "A Study on the Analytical Modeling for Warm Hydro-mechanical Deep Drawing of Lightweight Materials," in International Journal of Machine Tools and Manufacture, Vol 47, No.11, pp. 1752-1766

7.Q. Chang, J. Ni, P. Bandyopadhyay, S. Biller, G. Xiao, 2007, "Maintenance Staffing Management," Journal of Intelligent Manufacturing, Vol 18, pp. 351-360.

8.Z. Yang, D. Djurdjanovic, and J. Ni, 2007, "Maintenance Scheduling in Manufacturing Systems Based on Predicted Machine Degradation," Journal of Intelligent Manufacturing, Vol. 19, pp.87-98

9.J. Liu, D. Djurdjanovic, J. Ni, N. Casoettto, and J. Lee, 2007, "Similarity Based Method for Manufacturing Process Performance Prediction and Diagnosis," Computers in Industry, Vol. 58 (6), pp.558-566

10.Y. Lei, D. Djurdjanovic, J. Ni, J. Lee, G. Xiao, and J. R. Mayor, 2006, "System Level Optimization of Predictive Maintenance in Industrial Automation Systems," Transaction of NAMRI/SME, Vol. 34, pp.79-86

11.H. S. Kim, M. Koc, J. Ni, and A. Ghosh, 2006, "Finite Element Modeling and Analysis for Warm Forming of Aluminum Alloys – Validation Through Comparisons with Experiments and Determination of a Failure Criterion," ASME Transaction, Journal of Manufacturing Science and Engineering, Vol. 128, No.3, pp. 613-621

12.D. Djurdjanovic and J. Ni, 2006, "Stream of Variation (SOV) Based Measurement Scheme Analysis in Multi-Station Machining Systems," IEEE Transactions on Automation Science and Engineering, Vol. 3, No.4, pp. 407-422 (13)

13.Zhenhua Huang, Albert Shih and Jun Ni, 2006, "Phase Unwrapping for Large Depth-of-field 3D Laser Holographic Interferometry Measurement of Laterally Discontinuous Surfaces," Measurement Science and Technology. Vol. 17, pp. 3110-3119

14.Feng Ke, Jun Ni, and David Stephenson, 2006, "Chip-Thickening in Deep-Hole Drilling," International Journal of Machine Tools and Manufacturing, Vol. 46, No. 12-13, pp. 1500-1507

15.J. Lee, J. Ni, D. Djurdjanovic, H. Qiu, and H. Liao, 2006, "Intelligent Prognostics Tools and E-Maintenance," Computers in Industry, Special Issue on e-Maintenance, Vol. 57, No. 6, pp.476-489, August

16.H. Yang, and J. Ni, 2005, "Adaptive model estimation of machine-tool thermal errors based on recursive dynamic modeling strategy," International Journal of Machine Tools and Manufacturing, Vol. 45, pp. 1-11

17.G.Y. Kim, R. Mayor, and J. Ni, 2005, "Parametric Study of Microreator Design for Water Gas Shift Reactor using an integrated reaction and heat exchange model," Chemical Engineering Journal, Vol. 110, pp. 1-10

18.S. W. Lee, R. Mayor, and J. Ni, 2005, "Development of a Six-Degree-of-Freedom Geometric Error Measurement System for a Meso-Scale Machine Tool," ASME Transaction, Journal of Manufacturing Science and Engineering, Vol. 127, pp.857-865

19.J. Lee, J. Ni, D. Djurdjanovic, H. Qiu, and H. Liao, 2005, "Intelligent Prognostics Tools and E-Maintenance," Computers in Industry, Vol. 57, pp. 476-489

20.H. Chen, R. Mayor, and J. Ni, 2004, "Automated Structural Configuration Generation and Kinematic Error Analysis for Meso-Scale Machine Tools," Transaction of NAMRI, Vol. 32, pp.327-334

21.Dragan Djurdjanovic and Jun Ni, 2004, "Measurement Scheme Synthesis in Multi-Station Machining Systems" ASME Transaction, Journal of Manufacturing Science and Engineering, Vol. 126, No. 1, pp.178-189 (11)

22.S. Zhou, K. Shin, S. Dyer, J. Shi, and J. Ni, 2004, "Extended Influence Coefficient Methods for Rotor Active Balancing during Acceleration," ASME Transaction, Journal of Dynamics Systems, Measurement and Control, Vol. 126, pp. 219-223

23.Yizhu Zhang, Jiangqi Zhou, Zhongqing Lin, and Jun Ni, 2003, "Automatic process planning and subassembly detection for auto-body assembly," Journal of Computer-Aided Design and Computer Graphics, Vol. 15(6), pp. 680-684

24.K. Shin and J. Ni, 2003, "Adaptive Control of Multi-Plane Active Balancing Systems for Speed-Varying Rotors," ASME J. of Dyn. Sys. Measurement and Control, Vol. 125, pp. 372-281

25.Dragan Djurdjanovic, Jay Lee, and Jun Ni, 2003,"Watchdog Agent-an infotronics-based prognostics approach for product performance degradation assessment and prediction," Advanced Engineering Informatics, Vol. 17, pp. 109-125 (27)

26.Dragan Djurdjanovic and Jun Ni, 2003, "Bayesian Approach to Measurement Scheme Analysis in Multi-Station Machining System," Journal of Engineering Manufacturing, Vol., No. B8, pp. 1117-1130 (2)

27.B. Zhang, and J. Ni, 2001, "Relative Probability Index Crp – An Alternative Process Capability Index," Quality Engineering, Vol. 14(2), pp.265-276

28.C. Gong, J. Yuan, and J. Ni, 2000, "A Self-calibration Method for Robotic Measurement System," ASME ASME Transaction, Journal of Manufacturing Science and Engineering, Vol. 122, No. 1, pp 174-181 (16)

29.A. Khan, D. Ceglarek, J. Shi, J. Ni, and T. C. Woo, 1999, "Sensor Optimization for Fault Diagnosis in Single Fixture Systems: A Methodology," ASME Transactions, Journal of Manufacturing Science and Engineering, Vol.121, No.1, pp. 109-117 (17)

30.J. Yuan and J. Ni, 1998, "The Real-Time Error Compensation Technique for CNC Machining Systems." Journal of Mechatronics, Vol. 8, No. 3. pp. 359-380. (42)

31.J. C. Liang, H. F. Li, J. X. Yuan, and J. Ni, 1997, "A Comprehensive Error Compensation System for Correcting Geometric, Thermal, and Cutting Force-Induced Errors," The International Journal of Advanced Manufacturing Technology, Vol. 13, pp. 708-712 (2)

32.E. Lu, J. Ni, and S.M. Wu, 1996, "An Integrated Lattice Filter Adaptive Control System for Time-Varying CMM Structural Vibration Control, Part I: Theory and Simulation", ASME Transaction, Journal of Engineering for Industry, Vol. 118, No.1, p 67-76, and also presented at 1992 ASME WAM (1)

33.P.S. Huang, and J. Ni, 1995, "On-line error compensation of coordinate measuring machines", International Journal of Machine Tools and Manufacture, Vol. 35, No. 5 , pp. 725-738.

34.Y.D. Chen, X.J. Tang, J. Ni, and S.M. Wu, 1994, "Automatic Digitization of Free-Form Curve by Coordinate Measuring Machines", International Journal of Production Research, Vol. 32, No. 11, pp.2603-2612, also in Proceedings of ASME WAM, Anaheim, CA 1992 (5)

35.J. Ni and S.M.Wu, 1993, "An On-Line Measurement Technique for Machine Volumetric Error Compensation", ASME Transaction, Journal of Engineering for Industry, Feb., Vol. 115, No.1, pp.85-92 (6)

36.J.S. Chen, J.X. Yuan, J. Ni and S.M. Wu, 1992, "Compensation of Non-rigid Body Kinematic Effect on a Machining Center", Transaction of NAMRI, Vol. 20, pp.325-329

37.H. Zhang, J. Ni and S.M. Wu, 1990, "Simulation Study of An Improved Scheme for Forecasting Compensatory Control", Transaction of NAMRI , Vol. 18, pp.329-333

38.F. Shen, J. Ni and S.M. Wu, 1989, "Design and Implementation of a Modular Multi-Processor System for Machine Monitoring and Diagnostics", Transaction of NAMRI , Vol. 17, pp.319-324

资料来源