道路勘測設計檢視原始碼討論檢視歷史
 |
《道路勘測設計》，于斌，程建川 著，于斌，程建川 編，出版社： 東南大學出版社。
書籍是人類進步的階梯，合理閱讀使一個人完善自身的知識結構[1]，全面提升人文素質[2]，為走向成功奠定堅實的基礎。
內容簡介
本教材是在編寫團隊多年從事道路工程教學、科研、設計和軟件開發的基礎上編寫而成的，力求體現道路勘測設計新理念、新方法和新技術。在編寫理念上，本教材強調對道路幾何設計原理和方法的介紹，精煉道路幾何設計的傳統知識點，重點呼應道路規劃設計新理念、勘測設計新技術、道路幾何設計新方法，並以工程實用為抓手，進行教材的編撰；同時，採用知識點短視頻、二維碼等方式，以增強教材的時代感和易用性。
本教材主要內容包括道路勘測設計的目標及控制要素，道路平、縱、橫幾何設計，道路選線與定線，道路平面交叉與立體交叉設計，道路管理設施等內容，可以作為道路橋樑渡河工程、交通工程和土木工程專業的教材，也可供從事公路、城市道路及相關道路工程設計的工程技術人員和科研人員參考。
目錄
Chapter 1 Introduction
1.1 Introduction to roadway transportation
1.2 Introduction to road development in China
1.3 Classifications and technicaI standards of roads
1.3.1 Classifications of roads
1.3.2 Function systems and classifications of roads
1.3.3 Control elements of road design
1.3.4 Understanding and application of technical standards
1.4 Procedures of road survey and design
Chapter 2 Horizontal Aligmnent Design
2.1 Introduction
2.1.1 Elements of horizontal alignment
2.2 Tangent
2.2.1 Minimum length of tangents
2.2.2 Maximum length of tangents
2.3 Circular curve
2.3.1 Radius of circular curves
2.3.2 Calculation of the circular curve
2.4 Transition curve
2.4.1 Form of transition curves
2.4.2 Length of the transition curve
2.4.3 Calculation of the transition curve
2.4.4 Calculation of horizontal curves with the spiral
2.5 Principle of horizontal alignment design
2.6 Method of horizontal alignment design
2.6.1 Tangent design method
2.6.2 Curve design method
2.7 Combination of horizontal alignment elements
2.7.1 Combination of the tangent and the curve
2.7.2 Combination of curves
2.8 Deliverables of horizontal alignment design
2.8.1 Table of tangents，curves，and intersection angles
2.8.2 Table of coordinates by stakes
2.8.3 Chart of horizontal alignment
Chapter 3 Vertical Ali舢nt DesigIl
3.1 Introduction
3.2 Grade design
3.2.1 Grade design standards
3.2.2 Requirement of grade design
3.3 Vertical alignment design
3.3.1 Concepts related to vertical alignment design
3.3.2 Design standard of the vertical curve
3.3.3 General requirements for vertical aligmnent design
3.3.4 Design and calculation of the vertical alignment
3.4 am ination of horizontal and vertical alignments
3.4.1 Principles of the combination of horizontal and vertical alignments
3.4.2 Types of combination of horizontal and vertical alignments
3.4.3 Requirements for the combination
3.5 Design method of the vertical alignment
3.5.1 Requirements of the vertical alignment design
3.5.2 Methods and Steps of Vertical Alignment Design
3.5.3 Profile diagram
Chapter 4 Cross Section Design
4.1 Cross section layout and form
4.1.1 Layout and form of the highway cross section
4.1.2 Layout and form of the urban road cross section
4.2 Width of cross section components
4.2.1 Width of the traveled way
4.2.2 Width of the non-motor vehicle lane
4.2.4 Width and layout of sidewalk
4.2.5 Width of the shoulder
4.3 Lane separator
4.3.1 Application of the lane separator
4.3.2 Function of the lane separator
4.3.3 Width of the lane separator
4.4 Rate of the cross slope and supereIevation
4.4.1 Rate and form of the cross slope
4.4.2 Road widening design
4.4.3 Superelevation design
4.5 Sight distance
4.5.1 Type of sight distance
4.5.2 Sight distance requirement
4.5.3 Sight distance requirement on curves
4.6 Cross section design and deliverable
4.6.1 Subgrade design table
4.6.2 Cross section design drawing
4.6.3 Calculation and allocation of earthwork
Chapter 5 Route Selection and Alignment Location
5.1 Introduction
5.2 New concept and overall road design
5.2.1 New concept of road design
5.2.2 Overall design principles
5.2.3 Main contents of the overall design
5.3 Route selection
5.3.1 General principles and requirements for highway route selection
5.3.2 Steps and methods of route selection
5.3.3 Route selection in the pre-feasibility study stage
5.3.4 Case of scheme comparison
5.3.5 Route selection in plain areas
5.3.6 Route selection in mountainous areas
5.4 AIignment location methods
Chapter 6 Intersection Design
6.1 Analysis
參考文獻
- ↑ 什麼是時代的知識結構——湯勝天，搜狐，2016-11-04
- ↑ 陳丹青：何謂人文素質教育？ ，搜狐，2017-11-24