模組:Convert/text檢視原始碼檢視歷史
此模塊的文檔可以在模塊:Convert/text/doc創建
-- Text used by Module:Convert for enwiki.
-- This is a separate module to simplify translation for use on another wiki.
-- See [[:en:Template:Convert/Transwiki guide]] if copying to another wiki.
local translation_table = {
omitsep = true, -- omit separator before local symbol/name
per_word = '每', -- for units like "liters per kilometer"
plural_suffix = '', -- disable plural unit names
specials = { -- for special processing by makeunits
-- The text here must be the same as that in the unit definitions.
utype = {
-- ["unit type in local language"] = "name_used_in_this_script"
["油耗"] = "type_fuel_efficiency",
["長度"] = "type_length",
["溫度"] = "type_temperature",
["容量"] = "type_volume",
},
ucode = {
exception = {
-- ["unit code in local language"] = "name_used_in_module_convert"
["ft"] = "integer_more_precision",
["in"] = "subunit_more_precision",
["lb"] = "integer_more_precision",
},
istemperature = {
-- Common temperature scales (not keVT or MK).
-- ["unit code in local language"] = 1
["C"] = true,
["F"] = true,
["K"] = true,
["R"] = true,
},
usesymbol = {
-- Use unit symbol not name if abbr not specified.
-- ["unit code in local language"] = 1
["C"] = 1,
["F"] = 1,
["K"] = 1,
["R"] = 1,
["C-change"] = 1,
["F-change"] = 1,
["K-change"] = 1,
},
alttype = {
-- Unit has an alternate type that is a valid conversion.
-- ["unit code in local language"] = "alternate type in local language"
["Nm"] = "能量",
["ftlb"] = "力矩",
["ftlb-f"] = "力矩",
["ftlbf"] = "力矩",
["inlb"] = "力矩",
["inlb-f"] = "力矩",
["inlbf"] = "力矩",
["inoz-f"] = "力矩",
["inozf"] = "力矩",
},
},
},
mtext = {
section_names = {
-- name_used_in_this_script = 'Section title used in conversion data'
overrides = '覆蓋單位',
conversions = '換算',
outmultiples = '多重輸出單位',
combinations = '組合單位',
inmultiples = '多重輸入單位',
defaults = '預設輸出單位',
links = '單位鏈接',
varnames = 'Variable names', -- (for slwiki)
},
},
}
-- Some units accept an SI prefix before the unit code, such as "kg" for kilogram.
local SIprefixes = {
-- The prefix field is what the prefix should be, if different from the prefix used.
-- 參閱[[國際單位制詞頭]]
['Y'] = { exponent = 24, name = '-{zh:堯;zh-cn:尧;zh-tw:佑;zh-hk:堯}-', name_long = '堯它', name_en = 'yotta'},
['Z'] = { exponent = 21, name = '-{zh:澤;zh-cn:泽;zh-tw:皆;zh-hk:澤}-', name_long = '澤它', name_en = 'zetta'},
['E'] = { exponent = 18, name = '-{zh:艾;zh-cn:艾;zh-tw:艾;zh-hk:穰}-', name_long = '艾可薩', name_en = 'exa'},
['P'] = { exponent = 15, name = '-{zh:拍;zh-cn:拍;zh-tw:拍;zh-hk:秭}-', name_long = '拍它', name_en = 'peta'},
['T'] = { exponent = 12, name = '-{zh:太;zh-cn:太;zh-tw:兆;zh-hk:垓}-', name_long = '太拉', name_en = 'tera'},
['G'] = { exponent = 9, name = '-{zh:吉;zh-cn:吉;zh-tw:吉;zh-hk:京}-', name_long = '吉咖', name_en = 'giga'},
['M'] = { exponent = 6, name = '-{zh:百萬;zh-cn:兆;zh-tw:百萬;zh-hk:百萬}-', name_long = '百萬', name_en = 'mega'},
['k'] = { exponent = 3, name = '千', name_en = 'kilo'},
['h'] = { exponent = 2, name = '百', name_en = 'hecto'},
['da']= { exponent = 1, name = '十', name_en = 'deca'},
['d'] = { exponent = -1, name = '分', name_en = 'deci'},
['c'] = { exponent = -2, name = '厘', name_en = 'centi'},
['m'] = { exponent = -3, name = '毫', name_en = 'milli'},
['μ'] = { exponent = -6, name = '微', name_en = 'micro', prefix = 'µ'}, -- key = 'GREEK SMALL LETTER MU' (U+03BC) utf-8 CE BC
['µ'] = { exponent = -6, name = '微', name_en = 'micro'}, -- key = 'MICRO SIGN' (U+00B5) utf-8 C2 B5
['u'] = { exponent = -6, name = '微', name_en = 'micro', prefix = 'µ'}, -- not an SI prefix, but allow for people typing this
['n'] = { exponent = -9, name = '-{zh:納;zh-cn:纳;zh-tw:奈;zh-hk:納}-', name_long = '納諾', name_en = 'nano'},
['p'] = { exponent =-12, name = '皮', name_long = '皮可', name_en = 'pico'},
['f'] = { exponent =-15, name = '飛', name_long = '飛母托', name_en = 'femto'},
['a'] = { exponent =-18, name = '阿', name_long = '阿托', name_en = 'atto'},
['z'] = { exponent =-21, name = '-{zh:仄;zh-cn:仄;zh-tw:介;zh-hk:仄}-', name_long = '仄普托', name_en = 'zepto'},
['y'] = { exponent =-24, name = '-{zh:幺;zh-cn:幺;zh-tw:攸;zh-hk:幺}-', name_long = '幺科托', name_en = 'yocto'},
}
-- Some units can be qualified with one of the following prefixes, when linked.
local customary_units = {
{ "US", link = "美制單位" },
{ "U.S.", link = "美制單位" },
{ "imperial", link = "英制單位" },
{ "imp", link = "英制單位" },
}
-- Names when using engineering notation (a prefix of "eN" where N is a number; example "e6km").
-- key = { "name", link = "article title", exponent = numeric_key_value }
-- If lk=on and link is defined, the name of the number will appear as a link.
local eng_scales = {
["3"] = { "× 10<sup>3</sup>", exponent = 3 },
["4"] = { "× 10<sup>4</sup>", exponent = 4 },
["5"] = { "× 10<sup>5</sup>", exponent = 5 },
["6"] = { "× 10<sup>6</sup>", exponent = 6 },
["7"] = { "× 10<sup>7</sup>", exponent = 7 },
["8"] = { "× 10<sup>8</sup>", exponent = 8 },
["9"] = { "× 10<sup>9</sup>", exponent = 9 },
["10"] = { "× 10<sup>10</sup>", exponent = 10 },
["11"] = { "× 10<sup>11</sup>", exponent = 11 },
["12"] = { "× 10<sup>12</sup>", exponent = 12 },
["13"] = { "× 10<sup>13</sup>", exponent = 13 },
["14"] = { "× 10<sup>14</sup>", exponent = 14 },
["15"] = { "× 10<sup>15</sup>", link = "数量级 (数)#1015", exponent = 15 },
}
-- One of the following categories is included in the text of each message.
-- Using the same category for each is simplest.
local all_categories = {
unit = "[[Category:未獲Convert模塊承認的單位或選項]]",
option = "[[Category:未獲Convert模塊承認的單位或選項]]",
}
-- For some error messages, the following puts the wanted style around
-- each unit code marked like '...%{ft%}...'.
local unitcode_regex = '%%([{}])'
local unitcode_replace = { ['{'] = '「', ['}'] = '」' } -- no longer need the more elaborate substitute used before 2013-09-28
-- All messages that may be displayed if a problem occurs.
local all_messages = {
-- Message format string: $1=title, $2=text, $3=category, $4=anchor.
-- Each displayed message starts with "Convert:" so can easily locate by searching article.
cvt_format = '<sup class="noprint Inline-Template" style="white-space:nowrap;">[<i>[[:en:Help:Convert messages#$4|<span title="Convert: $1">convert: $2</span>]]</i>]</sup>$3',
cvt_format2 = '<sup class="noprint Inline-Template" style="white-space:nowrap;">[[:en:Help:Convert messages#$4|<span title="Convert: $1">$2</span>]]</sup>$3',
cvt_format_preview = '<strong class="error">Error in convert: $1 [[:en:Help:Convert messages#$4|(help)]]</strong>$3',
-- Each of following messages is a table:
-- { [1] = 'title', -- mouseover title text
-- [2] = 'text', -- link text displayed in article
-- [3] = 'category key', -- key to lookup category in all_categories
-- [4] = 'anchor', -- anchor for link to relevant section on help page
-- regex = gsub_regex,
-- replace = gsub_table,
-- } Mouseover title text Link text CatKey Anchor
cvt_bad_input = { '参数值“$1”必须是个数字和单位' , '无效输入' , 'option', 'invalid_input' },
cvt_bad_num = { '參數值「$1」必須是個數字' , '無效數字' , 'option', 'invalid_number' },
cvt_big_prec = { '「$1」的精確度過高' , '精確度過高' , 'option', 'precision_too_large' },
cvt_invalid_num = { '數字溢出產生錯誤' , '數字溢出' , 'option', 'number_overflow' },
cvt_no_num = { '需要一個數字進行轉換' , '需要數字' , 'option', 'needs_number' },
cvt_no_num2 = { '需要另一個數字定義範圍' , '需要另一個數字' , 'option', 'needs_another_number' },
cvt_bad_frac = { '分母或分子「$1」必須是大過1的整數' , '無效分數' , 'option', 'invalid_fraction' },
cvt_bad_prec = { '精確度「$1」必須是整數' , '無效精確度' , 'option', 'invalid_precision' },
cvt_bad_sigfig = { '精準度參數sigfig「$1」必須是正整數' , '無效的sigfig' , 'option', 'invalid_sigfig' },
cvt_empty_option = { '留空的參數值「$1」已被忽視' , '留空的選項' , 'option', 'empty_option' },
cvt_deprecated = { '选项“$1"已被废弃' , '*' , 'option', 'deprecated_option', format = 'cvt_format2' },
cvt_no_spell = { '參數值無效' , '錯誤：請尋求協助' , 'option', 'ask_for_help' },
cvt_unknown_option = { '無效參數值「$1」已被忽視' , '無效的選項' , 'option', 'invalid_option' },
cvt_wd_fail = { '未能访问维基数据' , '维基数据问题' , 'option', 'wikidata_problem' },
cvt_bad_default = { '單位「$1」存在無效預設值' , '錯誤：請尋求協助' , 'unit' , 'ask_for_help' },
cvt_bad_unit = { '單位「$1」無效' , '單位於次無效' , 'unit' , 'unit_invalid_here' },
cvt_no_default = { '單位「$1」 沒有預設輸出值' , '錯誤：請尋求協助' , 'unit' , 'ask_for_help' },
cvt_no_unit = { '須要單位名字' , '缺失單位名' , 'unit' , 'needs_unit_name' },
cvt_unknown = { '不明單位「$1」' , '不明單位' , 'unit' , 'unknown_unit' },
cvt_should_be = { '$1' , '單位名有歧義' , 'unit' , 'ambiguous_unit', regex = unitcode_regex, replace = unitcode_replace },
cvt_mismatch = { '無法將「$1」轉換成「$2」' , '單位不匹配' , 'unit' , 'unit_mismatch' },
cvt_bug_convert = { '錯誤：無法轉換制定的單位' , '錯誤：請尋求協助' , 'unit' , 'ask_for_help' },
cvt_lookup = { '單位「$1」的定義不正確' , '錯誤：請尋求協助' , 'unit' , 'ask_for_help' },
}
-- Text to join input value/unit with output value/unit.
local disp_joins = {
-- [1]=before output, [2]=after output, [3]=between outputs in a combination; default "; "
-- [wantname] gives default abbr=off
["or"] = { "或" , "" , "或", wantname = true },
["sqbr-sp"] = { " [" , "]" },
["sqbr-nbsp"] = { " [" , "]" },
["comma"] = { ", " , "" , "" },
["slash-sp"] = { "／" , "" , wantname = true },
["slash-nbsp"] = { "／", "" , wantname = true },
["slash-nosp"] = { "／" , "" , wantname = true },
["b"] = { "（" , "）", "；" },
["(or)"] = { "（" , "）", "或" },
["br"] = { "<br/>" , "" , wantname = true },
["br()"] = { "<br/>（" , "）", wantname = true },
}
-- Text to separate values in a range.
local range_types = {
-- Specifying a table requires either:
-- * "off" and "on" values (for "abbr=off" and "abbr=on"), or
-- * "input" and "output" values (for LHS and RHS);
-- other fields are optional.
-- When "adj=on|abbr=off" applies, spaces in range text are replaced with hyphens.
-- With "exception = true", that also occurs with "adj=on|abbr=on".
-- If "adj" is defined here, that text (unchanged) is used with "adj=on".
["+"] = "加",
[","] = "、",
[", and"] = "和",
[", or"] = "或",
["by"] = "乘",
["-"] = "～",
["to about"] = "至大約",
["and"] = { off = "和", on = "、", exception = true },
["and(-)"] = { input = "和", output = "～" },
["or"] = { off = "或" , on = "或" , exception = true },
["to"] = { off = "至" , on = "至" , exception = true },
["to(-)"] = { input = "至", output = "～" },
["+/-"] = { off = "正負", on = " ± ", adj = "正負", is_range_change = true },
["by(x)"] = { input = "乘", output = " × ", out_range_x = true },
["x"] = { off = "乘", on = " × ", abbr_range_x = true },
["xx"] = "乘",
["*"] = "×", -- use "*" to replace "x" in {{convert/2}} which is different from "x" in old {{convert}}
["/"] = "／", -- for a table of high/low temperatures with {{convert|83|/|63|F|disp=br()|abbr=values}}
}
local range_aliases = {
-- ["alternative name for a range"] = "standard range name"
["&"] = "and",
["–"] = "-",
["–"] = "-",
["to-"] = "to(-)",
["×"] = "x",
["×"] = "x",
["±"] = "+/-",
["±"] = "+/-",
["和"] = "and",
["或"] = "or",
["至"] = "to",
}
-- Convert accepts range text delimited with whitespace, for example, {{convert|1 to 2|ft}}.
-- In addition, the following "words" are accepted without spaces, for example, {{convert|1-2|ft}}.
-- Words must be in correct order for searching, for example, 'x' after 'xx'.
local range_words = { '-', '–', 'xx', 'x', '*' }
local ranges = {
types = range_types,
aliases = range_aliases,
words = range_words,
}
-- Valid option names.
local en_option_name = {
-- ["local text for option name"] = "en name used in this module"
["$"] = "$",
["abbr"] = "abbr",
["adj"] = "adj",
["comma"] = "comma",
["debug"] = "debug",
["disp"] = "disp",
["frac"] = "frac",
["input"] = "input",
["lang"] = "lang",
["lk"] = "lk",
["near"] = "near",
["order"] = "order",
["qid"] = "qid",
["round"] = "round",
["sigfig"] = "sigfig",
["sing"] = "adj", -- "sing" is an old alias for "adj"
["sortable"] = "sortable",
["sp"] = "sp",
["spell"] = "spell",
["stylein"] = "stylein",
["styleout"] = "styleout",
}
-- Valid option values.
-- Convention: parms.opt_xxx refers to an option that is set here
-- (not intended to be set by the template which invokes this module).
-- Example: At enwiki, "abbr" includes:
-- ["comma"] = "opt_nocomma"
-- As a result, if the template uses abbr=comma, Module:Convert sets:
-- parms["opt_nocomma"] = true
-- parms["abbr"] = nil
-- Therefore parms.abbr will be nil, or will have one of the listed values
-- that do not start with "opt_".
-- An option value of form "xxx?" is the same as "xxx" but shows the input as deprecated.
local en_option_value = {
-- $=x is handled as a special case: x should be a currency symbol that will be used instead of "$"
["abbr"] = {
-- ["local text for option value"] = "en value used in this module"
["comma"] = "opt_nocomma?", -- no numsep in input or output numbers
["def"] = "", -- ignored (some wrapper templates call convert with "abbr=def" to mean "default abbreviation")
["h"] = "on", -- abbr=on + use "h" for hand unit (default)
["hh"] = "opt_hand_hh", -- abbr=on + use "hh" for hand unit
["in"] = "in", -- use symbol for LHS unit
["mos"] = "mos", -- in a range, repeat the input unit (no longer used)
["none"] = "off", -- old name for "off"
["off"] = "off", -- use name for all units
["on"] = "on", -- use symbol for all units
["out"] = "out", -- use symbol for RHS unit (default)
["unit"] = "unit", -- abbr=on but abbreviate units only: e6km → million km (not ×10⁶ km)
["values"] = "opt_values", -- show only input and output numbers, not units
["~"] = "opt_also_symbol", -- show input unit symbol as well as name
},
["adj"] = {
["1"] = "opt_singular", -- unit name is singular when value satisfies: (-1 <= v and v < 0) or (0 < v and v <= 1)
["flip"] = "opt_flip?", -- reverse order of input/output
["j"] = "opt_use_nbsp", -- "join": use " " instead of " " between value and unit name
["mid"] = "opt_adjectival, opt_adj_mid", -- adj=on with user-specified text after input unit (between input and output)
["nocomma"] = "opt_nocomma?", -- no numsep in input or output numbers
["off"] = "", -- ignored (off is the default)
["on"] = "opt_adjectival", -- unit name is singular and hyphenated
["pre"] = "opt_one_preunit", -- user-specified text before input unit
["ri0"] = "opt_ri=0", -- round input with precision = 0
["ri1"] = "opt_ri=1", -- round input with precision = 1
["ri2"] = "opt_ri=2", -- round input with precision = 2
["ri3"] = "opt_ri=3", -- round input with precision = 3
},
["comma"] = {
["5"] = "opt_comma5", -- only use numsep grouping if 5 or more digits
["gaps"] = "opt_gaps", -- use gaps, not numsep, to separate groups of digits
["gaps3"] = "opt_gaps, opt_gaps3", -- group only in threes rather than default of no gap before a single digit after decimal mark
["gaps5"] = "opt_gaps?", -- deprecated 2015-05-29, was: opt_gaps + opt_comma5
["off"] = "opt_nocomma", -- no numsep in input or output numbers
},
["debug"] = {
["yes"] = "opt_sortable_debug", -- make the normally hidden sort key visible
},
["disp"] = {
["/"] = "or?", -- see "slash"
["2"] = "opt_output_only?", -- display only output value and symbol/name (not input)
["5"] = "opt_round=5", -- round output value to nearest 5
["b"] = "b", -- join: '(...)'
["(or)"] = "(or)", -- join: '(...)' with 'or' between outputs in a combination
["br"] = "br", -- join: '<br />'
["br()"] = "br()", -- join: '<br />(...)'
["comma"] = "comma", -- join: ','
["flip"] = "opt_flip", -- reverse order of input/output
["flip5"] = "opt_flip, opt_round=5?", -- disp=flip + disp=5
["nocomma"] = "opt_nocomma?", -- no numsep in input or output numbers
["number"] = "opt_output_number_only", -- display output value (not input, and not output symbol/name)
["or"] = "or", -- join: 'or'
["out"] = "opt_output_only",
["output number only"] = "opt_output_number_only",
["output only"] = "opt_output_only",
["preunit"] = "opt_two_preunits", -- user-specified text before input and output units
["s"] = "or?", -- see "slash"
["slash"] = "or?", -- 2014-11-03: "disp=slash" is now equivalent to "disp=or" as slash is unhelpful
["sqbr"] = "sqbr", -- join: '[...]'
["table"] = "opt_table", -- output is suitable for a table cell with align="right"
["tablecen"] = "opt_tablecen", -- output is suitable for a table cell with align="center"
["u2"] = "opt_output_unit_only?", -- display output symbol/name (not input, and not output value)
["unit"] = "opt_input_unit_only", -- display input symbol/name (not output, and not input value)
["unit or text"] = "opt_input_unit_only, opt_ignore_error", -- display input symbol/name, or given unit code if not known
["unit2"] = "opt_output_unit_only",
["x"] = "x", -- join: <first>...<second> (user-specified text)
},
-- frac=x is handled as a special case: x must be an integer (possibly in local language) = 2 or more
-- input=x is handled as a special case: x should be <value><space><unitcode> or <wikidata-property-id>
["lang"] = { -- language for output digits (both en and local digits are always accepted for input)
["en"] = "opt_lang_en", -- use en digits for numbers, regardless of local language
["local"] = "opt_lang_local", -- use local digits for numbers (default, although config can change default to en)
},
["lk"] = {
["in"] = "in", -- link LHS unit name or symbol
["off"] = "off", -- do not link: same as default except for hand unit
["on"] = "on", -- link all unit names or symbols (but not twice for the same unit)
["out"] = "out", -- link RHS unit name or symbol
},
["near"] = {
["5"] = "opt_round=5?", -- round output value to nearest 5
},
["order"] = {
["flip"] = "opt_flip", -- reverse order of input/output
["out"] = "opt_order_out", -- do not show input; instead, use order in output combination, with the first output shown as the input
},
-- qid=x is handled as a special case: x should be a Wikidata Q item identifier.
["round"] = {
["0.5"] = "opt_round=0.5", -- round output value to nearest 0.5
["5"] = "opt_round=5", -- round output value to nearest 5
["10"] = "opt_round=10", -- round output value to nearest 10 (same as but clearer than "|-1")
["25"] = "opt_round=25", -- round output value to nearest 25
["50"] = "opt_round=50", -- round output value to nearest 50
["each"] = "opt_round_each", -- using default precision in a range, round each output separately (default uses highest precision of each item in range)
},
-- sigfig=x is handled as a special case: x must be an integer (possibly in local language) = 1 or more
["sortable"] = {
["off"] = "", -- ignored (off is the default)
["in"] = "opt_sortable_on?", -- same as "on"
["on"] = "opt_sortable_on", -- output sort key for use in a sortable table, based on value from converting to a standard base unit
["out"] = "opt_sortable_on?", -- same as "on"
},
["sp"] = {
["us"] = "opt_sp_us", -- use U.S. spelling (like "meter" instead of default "metre")
},
["spell"] = { -- only English spelling is supported; not scientific notation; only some fractions
["in"] = "opt_spell_in", -- spell input value in words
["In"] = "opt_spell_in, opt_spell_upper", -- spell input value in words with first letter uppercase
["on"] = "opt_spell_in, opt_spell_out", -- spell input and output values in words
["On"] = "opt_spell_in, opt_spell_out, opt_spell_upper", -- same, with first letter of first word in result uppercase
},
-- stylein=x is handled as a special case: x can be any text
-- styleout=x is handled as a special case: x can be any text
}
return {
SIprefixes = SIprefixes,
all_categories = all_categories,
all_messages = all_messages,
currency = { ['$'] = true, ['£'] = true },
customary_units = customary_units,
disp_joins = disp_joins,
en_option_name = en_option_name,
en_option_value = en_option_value,
eng_scales = eng_scales,
ranges = ranges,
translation_table = translation_table,
}