道路勘测设计查看源代码讨论查看历史
 |
《道路勘测设计》，于斌，程建川 著，于斌，程建川 编，出版社： 东南大学出版社。
书籍是人类进步的阶梯，合理阅读使一个人完善自身的知识结构[1]，全面提升人文素质[2]，为走向成功奠定坚实的基础。
内容简介
本教材是在编写团队多年从事道路工程教学、科研、设计和软件开发的基础上编写而成的，力求体现道路勘测设计新理念、新方法和新技术。在编写理念上，本教材强调对道路几何设计原理和方法的介绍，精炼道路几何设计的传统知识点，重点呼应道路规划设计新理念、勘测设计新技术、道路几何设计新方法，并以工程实用为抓手，进行教材的编撰；同时，采用知识点短视频、二维码等方式，以增强教材的时代感和易用性。
本教材主要内容包括道路勘测设计的目标及控制要素，道路平、纵、横几何设计，道路选线与定线，道路平面交叉与立体交叉设计，道路管理设施等内容，可以作为道路桥梁渡河工程、交通工程和土木工程专业的教材，也可供从事公路、城市道路及相关道路工程设计的工程技术人员和科研人员参考。
目录
Chapter 1 Introduction
1.1 Introduction to roadway transportation
1.2 Introduction to road development in China
1.3 Classifications and technicaI standards of roads
1.3.1 Classifications of roads
1.3.2 Function systems and classifications of roads
1.3.3 Control elements of road design
1.3.4 Understanding and application of technical standards
1.4 Procedures of road survey and design
Chapter 2 Horizontal Aligmnent Design
2.1 Introduction
2.1.1 Elements of horizontal alignment
2.2 Tangent
2.2.1 Minimum length of tangents
2.2.2 Maximum length of tangents
2.3 Circular curve
2.3.1 Radius of circular curves
2.3.2 Calculation of the circular curve
2.4 Transition curve
2.4.1 Form of transition curves
2.4.2 Length of the transition curve
2.4.3 Calculation of the transition curve
2.4.4 Calculation of horizontal curves with the spiral
2.5 Principle of horizontal alignment design
2.6 Method of horizontal alignment design
2.6.1 Tangent design method
2.6.2 Curve design method
2.7 Combination of horizontal alignment elements
2.7.1 Combination of the tangent and the curve
2.7.2 Combination of curves
2.8 Deliverables of horizontal alignment design
2.8.1 Table of tangents，curves，and intersection angles
2.8.2 Table of coordinates by stakes
2.8.3 Chart of horizontal alignment
Chapter 3 Vertical Ali舢nt DesigIl
3.1 Introduction
3.2 Grade design
3.2.1 Grade design standards
3.2.2 Requirement of grade design
3.3 Vertical alignment design
3.3.1 Concepts related to vertical alignment design
3.3.2 Design standard of the vertical curve
3.3.3 General requirements for vertical aligmnent design
3.3.4 Design and calculation of the vertical alignment
3.4 am ination of horizontal and vertical alignments
3.4.1 Principles of the combination of horizontal and vertical alignments
3.4.2 Types of combination of horizontal and vertical alignments
3.4.3 Requirements for the combination
3.5 Design method of the vertical alignment
3.5.1 Requirements of the vertical alignment design
3.5.2 Methods and Steps of Vertical Alignment Design
3.5.3 Profile diagram
Chapter 4 Cross Section Design
4.1 Cross section layout and form
4.1.1 Layout and form of the highway cross section
4.1.2 Layout and form of the urban road cross section
4.2 Width of cross section components
4.2.1 Width of the traveled way
4.2.2 Width of the non-motor vehicle lane
4.2.4 Width and layout of sidewalk
4.2.5 Width of the shoulder
4.3 Lane separator
4.3.1 Application of the lane separator
4.3.2 Function of the lane separator
4.3.3 Width of the lane separator
4.4 Rate of the cross slope and supereIevation
4.4.1 Rate and form of the cross slope
4.4.2 Road widening design
4.4.3 Superelevation design
4.5 Sight distance
4.5.1 Type of sight distance
4.5.2 Sight distance requirement
4.5.3 Sight distance requirement on curves
4.6 Cross section design and deliverable
4.6.1 Subgrade design table
4.6.2 Cross section design drawing
4.6.3 Calculation and allocation of earthwork
Chapter 5 Route Selection and Alignment Location
5.1 Introduction
5.2 New concept and overall road design
5.2.1 New concept of road design
5.2.2 Overall design principles
5.2.3 Main contents of the overall design
5.3 Route selection
5.3.1 General principles and requirements for highway route selection
5.3.2 Steps and methods of route selection
5.3.3 Route selection in the pre-feasibility study stage
5.3.4 Case of scheme comparison
5.3.5 Route selection in plain areas
5.3.6 Route selection in mountainous areas
5.4 AIignment location methods
Chapter 6 Intersection Design
6.1 Analysis
参考文献
- ↑ 什么是时代的知识结构——汤胜天，搜狐，2016-11-04
- ↑ 陈丹青：何谓人文素质教育？ ，搜狐，2017-11-24