李俊玲檢視原始碼討論檢視歷史
|
李俊玲，女，北京科技大學機械工程學院講師。
人物簡歷
教育經歷
(1) 2015.09-2019.06，北京科技大學，機械工程，博士，
(2) 2013.09-2015.06, 北京科技大學，機械工程，碩士，
(3) 2009.09-2013.06，河北工程大學，機械設計製造及其自動化，學士
工作經歷
(1) 2021.07-至今， 北京科技大學，機械工程，講師
(2) 2019.06-2021.06，北京科技大學，博士後
科研方向
零件軋製成形理論與技術、高性能輕量化金屬塑性成形理論、多尺度建模仿真
本科生課程：工程製圖
學術成果
論著
(1) Li Junling#*; Wang Baoyu; Fang Shuang; Chen Ping; A new process chain combining cross-wedge rolling and isothermal forging for the forming of titanium alloy turbine blades, The International Journal of Advanced Manufacturing technology, 2020, 108: 1827-1838.
(2) Li Junling#*; Wang Baoyu; Fang Shuang; Chen Ping; Investigation of the microstructure evolution and mechanical properties of a TC6 alloy blade preform produced by cross wedge rolling. Archives of Civil and Mechanical Engineering, 2020. https://doi.org/10.1007/s4345 2-020-00078-2
(3) Li, Junling#; Wang, Baoyu*; Huang, He; Fang, Shuang; Chen, Ping; Zhao, Jie; Qin, Yi; Behaviour and constitutive modelling of ductile damage of Ti-6Al-1.5Cr-2.5Mo-0.5Fe-0.3Si alloy under hot tensile deformation, Journal of Alloys and Compounds, 2019, 780: 284-292.
(4) Li, Junling#; Wang, Baoyu*; Qin, Yi; Fang, Shuang; Huang, Xu; Chen, Ping; Investigating the effects of process parameters on the cross wedge rolling of TC6 alloy based on temperature and strain rate sensitivities, The International Journal of Advanced Manufacturing Technology, 2019, 103(5-8): 2563-2577
(5) .Li Junling#; Wang Baoyu*; Huang He; Fang Shuang; Chen Ping; Shen Jinxia; Unified modelling of the flow behaviour and softening mechanism of a TC6 titanium alloy during hot deformation, Journal of Alloys and Compounds, 2018, 748: 1031-1043.
(6) Junling Li, Baoyu Wang, Hongchao Ji, Jing Zhou, Xiaobin Fu, Xu Huang. Numerical and experimental investigation on the cross wedge rolling of powder sintering TC4 alloy. The International Journal of Advanced Manufacturing Technology, 2018, 94: 2149-2162.
(7) Junling Li, Baoyu Wang, Investigation on the evolution of the alpha phase during cross wedge rolling of TC6 blade perform, Procedia Manufacturing, 17th International Conference on Metal Forming, Toyohashi, Japan, 2018,15:168-175.
(8) Junling Li, Baoyu Wang, Hongchao Ji, Xu Huang, Xuefeng Tang, Weiping Ma. Effects of the cross-wedge rolling parameters on the formability of Ti-6Al-4V alloy, The International Journal of Advanced Manufacturing Technology, 2017,92:2217-2229.
(9) Ping Chen, Junling Li, Yunlong Li. Effective of geometric micro-groove texture patterns on tribological performance of stainless steel, Journal of Central South University,
(10) Ping Chen, Junling Li, Zhe Shi, Xin Xiang. Numerical optimization of gourd-shaped surface texture and experiment of tribological performance, Journal of Central South University, 2017,24:2773-2782.
(11) 李俊玲, 陳平, 邵天敏,項欣.葫蘆形微凹坑對不鏽鋼表面摩擦學性能的影響.摩擦學學報, 2016, 2(36):207-214.
(12) 陳平,李俊玲,邵天敏,項欣,劉光磊.考慮表面張力影響的表面織構最優參數分析.機械工程學報,2016,19(52):123-131.
成果與榮譽
主持國家自然科學基金項目、中國博士後科學基金、北京科技大學
金屬輕量化成形製造北京市重點實驗室開放基金、中央高校基本科研業務費等項目。參與國家重點研發計劃、國家重大專項、國家自然科學基金等項目，已發表SCI/EI論文20餘篇。[1]