求真百科歡迎當事人提供第一手真實資料,洗刷冤屈,終結網路霸凌。

劉愛軍檢視原始碼討論檢視歷史

事實揭露 揭密真相
前往: 導覽搜尋
劉愛軍

劉愛軍,男,合肥工業大學材料科學與工程學院實驗師。

人物履歷

2017.10--至今 合肥工業大學 材料學院實驗中心 實驗師

2019.9--至今 合肥工業大學 材料科學與工程學院 博士後

2012.09--2017.06 合肥工業大學 材料科學與工程學院 博士

2009.09--2012.06 合肥工業大學 材料科學與工程學院 碩士

實驗課程

實驗課程:焊縫殘餘應力測定、弧焊電源特性測定、鋼板焊接接頭超聲波探傷以及鋁合金Tig焊接工藝實驗實驗;衝壓模具和注塑模具拆裝實驗,拉深實驗、零件的反求實驗等。

科研項目

[1]安徽省重點實驗室,自主創新專項,PA2019GDPK0090,高緻密化氧化銦錫符合分體的製備方法,2019/06-2020/3,5 萬元,在研,主持;

[2]合肥工業大學,實驗室自製儀器項目,35012-020004,焊接過程中熔池觀察系統的研製,2019.5-2020.5,1.8萬元,結題,主持;

[3]XX公司, 企業委託項目,W2019JSKF0161,單壁碳納米管增強鋁基複合材料研究,2019.3-2021.3,39萬元,在研,主持;

[4]合肥工業大學,博士專項基金項目,JZ2018HGBZ0130,雙結構 Ti(C,N)基金屬陶瓷組織韌化機理的研究,2018/01-2019/12,2 萬元,結題,主持。

[5].XX公司,企業委託項目,1500~1800MPa級超高強熱成形鋼氫擴與損傷的氫微印表徵分析,W2020JSFW0471,2020.8-2021-6 國有企業, ,18.851萬 主持

學術成果

學術論文

[1]Liu, Aijun; Liu, Ning* ; Effect of WC-Co granules on mechanical properties and microstructure of Ti(C,N)-based cermets , Ceramics International, 2016, 42(14): 15274-15284

[2]Li Qilong; Liu, Ning*,Liu aijun; Effects of NiTi additions on the microstructure and mechanical properties of Ti(C,N)-based cermet[J]International Journal of Refractory Metals & Hard Materials,2013,40:43-50

[3]Liu Aijun; Liu Ning* ;     Effect of granule size and WC content on microstructure and mechanical properties     of double structure Ti(C,N) based cermets , Rare Metal Materials and     Engineering, 2019, 48(2): 375-384. 

[4] Pan, Yafei; Liu, Aijun; Huang, Lei; Du, Yong; Jin, Yaqin; Yang, Xinyu; Zhang, Jiuxing* ; Effects of metal binder content and carbide grain size on the microstructure and properties of SPS manufactured WC-Fe composites , Journal of Alloys and Compounds, 2019, 784: 519-526.

[5]Aijunliu; Gang Li; Ning Liu; Kebei Chen; Haidong Yang; Microstructure, mechanical properties, sintering and fracture behavior of Ti(C, N) Based cermets granules/Ti(C, N) based cermets composite , Key Engineering Materials, 2020, 837(2): 139-145

[6]劉愛軍, 劉寧, 陳新傑,等. 電冶熔鑄WC鋼結硬質合金斷裂韌度研究[J]. 熱處理, 2014(06):16-19.

[7]劉愛軍, 劉寧, 陳新傑,等. 淬火溫度對鋼結硬質合金DGJW30組織和性能的影響[J]. 熱處理, 2014(4):24-28.

[8]劉愛軍,劉寧,石俊,等.鋼結硬質合金DGJW30顯微硬度的研究 [J].稀有金屬與硬質合金,2014, 42,(4):68-72

[9]劉愛軍, 劉寧, 張宏亮,等. 回火對鋼結硬質合金 DGJW30組織和性能的影響[J]. 熱處理, 2014(2) :47-50.

[10]劉愛軍, 王國平, 鍾志宏,等. CMT堆焊低合金鋼的組織和性能及其衝擊斷裂行為[J]. 焊接, 2020(4) :11-15.[1]

參考資料